General

Operating Depth
Delrin	200 m
Aluminium Alloy	2000 m
Stainless Steel	2000 m
Titanium	6000 m
Operating Range	6000 m
Frequency Band	13 - 24 kHz
Transducer Beam Pattern	directional, 70 degrees

USBL

Slant Range Accuracy [1]	0.01 m
Bearing Resolution	0.1 deg
Nominal SNR	10 dB

Connection

Acoustic Connection	up to 9.2 kbit/s
Bit Error Rate	less than 10-¹⁰
Internal Data Buffer	1 MB, configurable
Host Interface [2]	Ethernet or RS-232
Interface Connector	up to 4 connectors, Ethernet serial combinations

Power

Power Consumption [3]
Stand-by Mode	2.5 mW
Listen Mode	5 - 285 mW
Receive Mode	1.4 W
Transmit Mode	5.5 W, 250 m range 8 W, 500 m range 18 W, 1000 m range 57 W, max. available
Power Supply [4]
External	24 VDC (12 VDC)
Internal	Rechargeable battery 5 Ah or 10 Ah

Physical

Housing Options
Delrin	✓
Aluminium Alloy	✓
Stainless Steel	✓
Titanium	✓
Dimensions [5]
Housing	Ø 110x218mm
USBL antenna	Ø 180x185mm
Total length	403 mm
Weight dry/wet
Delrin	8100/1400 g
Aluminium Alloy	9800/5300 g
Stainless Steel	13640/9540 g
Titanium	13420/8920 g

[1] Accuracy obtained in environment with a fl at sound velocity profi le, slant ranges estimated in local coodinate frame of the device  without the aid 
     of AHRS/GNSS and/or any other sensors contributing to the resulting accuracy. Slant range estimation is based  on the measured propagation time,               slant range accuracy depends on sound velocity profi le, refraction and signal-to-noise ratio. 
[2] One RS-232 Interface can be replaced with a RS-422 interface. Contact EvoLogics for more information! 
[3] Power consumption for RS-232 interface. Add 500 mW if an Ethernet interface is installed. Add 300 mW if the Wake-Up Module is installed.
      User-configurable Listen Mode is only available with a Wake-Up module installed. Power consumption in Listen Mode depends on Listen Mode settings. 
[4] 300 VDC available for 42/65 models. Contact EvoLogics for more information on power supply options! 
[5] Dimensions of a Delrin housing, other builds are slightly larger. Dimensions vary depending on housing type and installed options.
      Contact EvoLogics for more information on device dimensions and weights, request a drawing if necessary. 
[6] Internal Xsens® MTi AHRS (Attitude and Heading Reference System) compensates the changes of roll,
      pitch and heading. Power consumption increases by 400 mW with AHRS installed.
[7] The Wake Up Module is only compatible with RS-232 interface! It is not compatible with Ethernet or RS-422.
      2-channel Wake Up Module version reacts to incoming data on two serial interfaces. 
[8] The Power Switch is only compatible with RS-232 interface! It is not compatible with Ethernet or RS-422.